1. The determination of treatment capacity is based on the following conditions:
A. Limestone with compressive strength less than or equal to 150MPa; b. The loose density of the material is 1.6 + - / m3; c. Sufficient and continuous feeding.
2. Crushers of the same specification can be installed with different installed power according to the treatment range specified in the standard to meet different needs.
3. For PL stone, 20-40% is formed by striking stone or less than 5mm, and 30-60% is formed by striking iron less than 5mm for plst.
4. Pl (st) - 850 (d) is driven by a single motor.
